|
Product Details:
|
| LCD Display: | 3.5 Inch TFT Display | Size: | 265mmx105mmx305mm |
|---|---|---|---|
| Material: | Plastic, Metal, Silica Gel | Product Name: | Digital LCR Meter |
| Model No.: | 4090A | Packing Details: | 6pcs/Carton; Carton Size: 103*45*45cm;20.5KG/Carton |
| High Light: | TFT Display Handheld LCR Meter,RS232 Handheld LCR Meter,RS232 benchtop multimeter |
||
TFT Display Handheld LCR Meter With USB RS232 Cable Data Storage Function
VICTOR 4090B LCR Meter Desktop Bridge LCR With Automatic Balance Bridge Principle Component Parameter Analyzer
Description
Thank you for purchasing and using our products. Before using this instrument, please confirm the contents of the last chapter "Warranty". In case of any non-conformity, please contact us as soon as possible to safeguard your interests. Make sure that the following items are attached to the bridge, where the optional accessories are included with the product only when ordered. If any items are missing, please contact your nearest sales office.
|
Standard Accessories: ● Four-terminal-pair Kelvin test cable (35A51). ● Three-core power cord (30A51). ● One User Manual. |
Optional accessories: ● RS232 serial cable / USB data cable. ● Handle cable. ● Four-terminal-pair Kelvin test fixture (including short block) ● SMD component test fixture (including short block) |
(4) The instrument has been carefully designed to reduce the clutter interference caused by the input at the AC power supply terminal. However, it shall be used in a low noise environment. If such is not the case, please install the power supply filter.
WARNING: In order to prevent leakage from causing damage to the instrument or person, the user must ensure that the ground line of the power supply is reliably connected to the earth.
| Model | VC4090A | VC4090B | VC4090C | VC4091A | VC4091B | VC4091C | |
| Testing frequency |
10Points(100,120, 200,400,800, 1K,2K,4K,8K,10K) |
12Points(100,120, 200,400,800,1K, 2K,4K,8K, 10K,15K,20K) |
16Points(100,120, 200,400,800,1K,2K, 4K,8K,10K,15K, 20K,40K,50K, 80K,100K) |
10~10KHz Continuously adjustable, a step of 1 Hz |
10~20KHz Continuously adjustable, a step of 1 Hz |
10~100KHz Continuously adjustable, a step of 1 Hz |
|
| Display screen | 3.5” TFT LCD screen | ||||||
| Number of display digits |
Principal parameter: 5 digit Secondary parameter: 5 digit |
||||||
| Measured parameter: |
Principal parameter: L/C/R/Z Secondary parameter: X/D/Q/θ/ESR |
||||||
| Measurement range |
L:0.001µH～99999H, C:0.001pF～99.999mF, R:0.0001Ω～99.999MΩ |
||||||
| Basic accuracy | 0.2% | ||||||
| Measuring display speed | 2 time/s (slow), 4 times/s (medium), 8 time/s (fast) | ||||||
| Internal bias | 0-1500mV adjustable, at a step of 1mV. | ||||||
| Testing level | Six fixed level(0.1V,0.3V,0.6V,1V,1.5V,2V) | 0.1~2V adjustable, at a step of 1mV. | |||||
| Signal source output impedance | 30Ω,100Ω | ||||||
| Calibration function | Open circuit calibration, short circuit calibration | ||||||
| Screening function | The limit range of screening can be set to -50%～＋50%, and the fixed points are 1%, 5%, 10% and 20%. | ||||||
| Comparator | 5 groups sorting,3 groups of qualified setting, one group of unqualified setting, one group of auxiliary setting | ||||||
| Interfaces | standard: RS232(or 485), USB Device, Handler ;optional :GPIB,USB Host | ||||||
| Others | Support dc resistance (DCR), electrolytic capacitor measurement model,Adjustment of backlight brightness, Chinese and English are optional | ||||||
Contact Person: Mrs. sales
Tel: +86 13924679853
Fax: 86-755-82268753-262
