Product Details:
|
Color: | Black And Orange | Packing: | Color Box |
---|---|---|---|
Weight: | Approx 496g | Display Mode: | 3.5-inch True Color LCD Display |
Dimension: | 310mm×270mm×52mm | Nuclear Phase Distance: | About 160m |
Current Range: | 0-20000A | Product Name: | Wireless High Voltage Nuclear Phase Ammeter |
High Light: | 20000A Electric Power Tester,315MHz Electric Power Tester,High Low Voltage Nuclear Phase Ammeter |
20000A Electric Power Tester High Low Voltage Nuclear Phase Ammeter
VICTOR 1700 Current Detector Wireless High-Low Voltage Nuclear Phase Ammeter Electricity Leakage Patrol Of Multi-Conductor Cable
1700 Wireless High Voltage Nuclear Phase Ammeter checking instrument, also known as smart wireless high voltage voice phase checking instrument, wireless high voltage phase checking instrument, referred to as phase checking instrument or phase checking meter, contains wireless receiver, XY detector, retractable insulated rod and other components. The receiver contains a 3.5-inch true color LCD screen, which
can show the phase checking results, phase, frequency, and vector diagram instructions at the same time, which makes it clear and intuitive.
The phase checking distance on the open ground is up to 1600m far, full intelligent phase checking of the voltage line covers the voltage of 10V
~ 550kV, in which the bare wire voltage of 35kV and below can be directly conducted with contact phase checking, and the bare wire voltage of over 35kV can be directly conducted with non-contact phase checking. Noncontact phase checking is to make the detector closer to the wire under test, and when the electric signal is inducted, the phase checking will be completed. This method avoids direct contact with the high voltage wire, so it is safer! The phase checking instrument can also function as high-voltage electroscope, high-pressure phase meter and high-pressure phase sequence meter, which can be used for testing electricity, phase sequence test, transformer group judgment and so on.
Technical Specification
VICTOR 1700 | |
Function | phase checking of wireless high-low voltage, current, leakage current, frequency, phase, phase sequence and electricity verification tested; electricity leakage patrol of multi-conductor cable |
Power Supply | DC 3.7V chargeable lithium battery, USB charging portal, working continuously for 10h |
Transmission Method | 315MHz 433MHz wireless transmission |
Nuclear Phase Distance | 150m |
Display Mode | 3.5-inch true color LCD display |
Tested Line Diameter | Ф168mm Conductor, or 168mm×245mm bus bar |
Range | Phase: 0.0°~360.0°; Phase checking voltage level: AC 10V~550kV; Frequency: 45Hz~75Hz; current: 0~20000A |
Resolution | 0.1°; 0.1Hz; 10mA |
Accuracy | phase: ≤±10° ; frequency: ≤±2Hz; current: 0~6000A, ±3%±5dgt; 6000A~2000A, ±4%±5dgt |
Phase Judge | In phase:-30°~30°; out of phase: 90°~150° and 210°~270° |
Voice Function | Voice such as in phase, out of phase, X signal normal, Y signal normal, etc. |
Size of Insulation Rod | About 5m long after extended; about 1m long after drawn back (5 nodes) |
Phase Checking Method | Contact phase checking: When the bare wire voltage is less than 35kV, or less than 110kV with a safety insulation sheath wire, adopt contact phase checking. (operating with an insulation rod) |
Noncontact phase checking: When the bare wire voltage is more than 35kV, or more than 110kV with a safety insulation sheath wire, adopt noncontact phase checking. (operating with an insulation rod) | |
Automatic Shutdown | About 15mins after startup, the instrument will be automatically shut down to reduce battery consumption |
Rated Current | Detector: 35mA max; Receiver: 300mA max |
Instrument Mass | Detector: 496g (including battery) Receiver: 395g (including battery) |
Insulation rod: 1.45kg Total mass: 13.5kg (including box) | |
Working Humidity And Temperature | -10℃~40℃; below 80%Rh |
Storage Humidity And Temperature | -10℃~60℃; below 70%Rh |
Contact Person: Mrs. sales
Tel: +86 13924679853
Fax: 86-755-82268753-262